Yellow Stains in Bathtub: Causes and DIY Solutions

House cleaning always requires extra effort when objects and appliances have been accumulating dirt, bacteria and other germs for a long time. Add to this the little time spent on it every day, and it is almost impossible to have a well disinfected and clean house, especially in the case of the bathroom and all its elements. it. For example, the toilet is prone to scaling, while the shower and bathtub are prone to mold and lime scale. Here are the best tricks for removing the most encrusted dirt from the bathtub.

Yellow bathtub, full of lime scale and mold: Efficient products to become clean and shiny again!

In the case of the bathtub, black spots in the corners (mold), bacteria and germ growth can create a REAL unhygienic mess. To prevent dirt from accumulating in the tub, we offer the following solutions with the most efficient and economical products.

  • Baking soda and vinegar

To remove all yellow and rust stains from the bathtub, pour a generous amount of baking soda all over the tub. Next, and with the help of a spray bottle, spray white vinegar on the areas covered with baking soda. You will notice that both products react and generate a white foam. This is normal! Let both products act for 30 minutes.Then, with a sponge or soft-bristled brush, start scrubbing into the stained areas, especially the dirtiest ones. After scrubbing thoroughly, rinse the entire surface with plenty of cold water and open doors and windows and let them dry naturally. These stains are caused by lack of cleanliness and lack of daily ventilation. With this method you will have a tub as shiny as the first day.

  • Salt, lemon and vinegar

In case your tub is full of limescale, it is best to apply a mixture of vinegar and table salt. For example, in a spray bottle pour two cups of white vinegar plus one cup of warm water plus the natural juice of one lemon. Also add 3 tablespoons of sea or regular salt and shake the spray container to integrate the ingredients. This homemade cleaner will remove limescale at once. It is also great for removing mold. To use it, simply pour it on the affected surfaces of the tub and use a scrub brush.

  • Hydrogen peroxide

Another very effective product for removing limescale and yellow stains from the tub is hydrogen peroxide or hydrogen peroxide. You just need to spray it on the affected surfaces, leave it on for about 30 minutes and rinse with warm water. Scrubbing will not be necessary!

To keep your bathtub clean, healthy and safe on a regular basis, it is best to clean it with water, soap and a splash of white vinegar. This will prevent dirt from taking root and being harder to remove. So, take a few seconds to go over the tub after each use, and you will then only have to spend a few minutes a week keeping it clean and disinfected.

Other tricks to keep your bathtub sparkling clean at all times

Here are some tricks for cleaning the bathtub faucet and unclogging the clogged drain. To restore shine to the bathtub faucet, we recommend rubbing half a lemon all over its surface. The acidity of the lemon will clean, disinfect and prevent scale buildup in the faucet.

Slow or clogged pipes? If water flows slowly in the bathtub, it is probably due to a clog. To fix it, all you have to do is unscrew the holder, remove the cover, and remove the dirt that was causing the blockage. In most cases, the blockage is caused by falling hairs. With tweezers remove them as much as possible and then pour a good amount of liquid ammonia through the tube, including the inlet. Leave for about 5 minutes and then rinse with warm water. Put the lid back on and screw it on tightly.

One trick to prevent scale buildup is to mix equal parts white vinegar and water. Spray the sponge with the mixture and run it over the entire tub, including faucets. Finally, rinse the tub thoroughly and finally wipe down the faucets and the rest of the chrome elements. Use the soft side of the sponge and polish with a dry microfiber cloth.

You May Also Like